COMSOL Multiphysics®
  • Electromagnetics
  • Structural & Acoustics
  • Fluid & Heat
  • Chemical
  • Multipurpose
  • Interfacing

Featured Videos

Clear All

Duration: 5:40

Joule Heating in a Fuse on a Circuit Board, Chapter 1

This is the first video in a 3-part demo on multiphysics modeling of resistive heating in an aluminum fuse. Chapter 1 demonstrates how to build the model and add materials. Watch chapter 2: Adding ...

Duration: 7:00

Joule Heating in a Fuse on a Circuit Board, Chapter 2

Multiphysics modeling of resistive heating in an aluminum fuse on a circuit board. In this second chapter of a 3-part demo you will learn how to add physics and solve the model. Watch chapter 3: ...

Duration: 8:35

Molecular Flow in an Ion-Implant Vacuum System Chapter 2

This two-chapter tutorial shows how to model an ion implantation system using the Molecular Flow interface available in the Microfluidics Module. Chapter 2 includes steps: solving and ...

Duration: 16:32

Tonpilz Piezo Transducer Tutorial

Video tutorial showing a study of the frequency response of a tonpilz piezo transducer in COMSOL Multiphysics. The model exhibits full multiphysics coupling between structural and piezoelectric ...

Duration: 13:45

Shell and Tube Heat Exchanger Model Tutorial

This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...

Duration: 6:10

Thermal Stress Analysis of a Turbine Stator Blade

Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...

Duration: 3:25

Cooling of an Injection Mold

INJECTION MOLDING: Cooling of a steering wheel injection mold, including pipe flow and heat transfer in cooling channels. The 1D cooling channels are fully coupled to the heat transfer simulation of ...

Duration: 8:36

Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

Duration: 7:10

Pressurized Orthotropic Container

In this video, a container made of rolled steel is subjected to an internal overpressure. As an effect of the manufacturing method, one of the three material principal directions—the out-of-plane ...

Duration: 7:10

Performing a Multibody Analysis on a Double Pendulum

You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces. In this step-by-step instructional video, you will ...

Duration: 7:47

Molecular Flow in an Ion-Implant Vacuum System Chapter 1

This two-chapter tutorial shows how to model an ion implantation system using the Molecular Flow interface available in the Microfluidics Module. Chapter 1 includes steps: adding physics, building ...

Duration: 2:43

Design and Model with LiveLink™ for Solid Edge®

COMSOL's LiveLink™ for Solid Edge® is the ultimate modeling software for Solid Edge® users. The partnership with Siemens PLM Software allows for CAD design synchronization, geometry repair and ...

Duration: 12:00

Deep Excavation Simulation Tutorial

This deep excavation tutorial shows the modeling process of a 26-meter excavation using the COMSOL Multiphysics Geomechanics Module. A parametric sweep is used to simulate the excavation steps in ...

Duration: 2:54

Modeling Mechanical Applications in COMSOL Multiphysics

COMSOL Multiphysics® is your ideal software solution for modeling mechanical applications and analyzing the multiple interacting physics affecting them. Structural mechanics, nonlinear material ...

Duration: 2:06

Modeling Chemical Applications

The application of modeling to chemical engineering is a cost-efficient way to explore new designs of systems and processes. COMSOL has been developing its capabilities with the chemical processes ...

Duration: 5:40

Joule Heating in a Fuse on a Circuit Board, Chapter 1

This is the first video in a 3-part demo on multiphysics modeling of resistive heating in an aluminum fuse. Chapter 1 demonstrates how to build the model and add materials.

Watch chapter 2: Adding ...

Duration: 7:00

Joule Heating in a Fuse on a Circuit Board, Chapter 2

Multiphysics modeling of resistive heating in an aluminum fuse on a circuit board. In this second chapter of a 3-part demo you will learn how to add physics and solve the model.

Watch chapter 3: ...

Duration: 8:35

Molecular Flow in an Ion-Implant Vacuum System Chapter 2

This two-chapter tutorial shows how to model an ion implantation system using the Molecular Flow interface available in the Microfluidics Module.

Chapter 2 includes steps: solving and ...

Duration: 16:32

Tonpilz Piezo Transducer Tutorial

Video tutorial showing a study of the frequency response of a tonpilz piezo transducer in COMSOL Multiphysics. The model exhibits full multiphysics coupling between structural and piezoelectric ...

Duration: 13:45

Shell and Tube Heat Exchanger Model Tutorial

This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...

Duration: 6:10

Thermal Stress Analysis of a Turbine Stator Blade

Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...

Duration: 3:25

Cooling of an Injection Mold

INJECTION MOLDING: Cooling of a steering wheel injection mold, including pipe flow and heat transfer in cooling channels. The 1D cooling channels are fully coupled to the heat transfer simulation of ...

Duration: 8:36

Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

Duration: 7:10

Pressurized Orthotropic Container

In this video, a container made of rolled steel is subjected to an internal overpressure. As an effect of the manufacturing method, one of the three material principal directions—the out-of-plane ...

Duration: 7:10

Performing a Multibody Analysis on a Double Pendulum

You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces.

In this step-by-step instructional video, you will ...

Duration: 7:47

Molecular Flow in an Ion-Implant Vacuum System Chapter 1

This two-chapter tutorial shows how to model an ion implantation system using the Molecular Flow interface available in the Microfluidics Module.

Chapter 1 includes steps: adding physics, building ...

Duration: 2:43

Design and Model with LiveLink™ for Solid Edge®

COMSOL's LiveLink™ for Solid Edge® is the ultimate modeling software for Solid Edge® users. The partnership with Siemens PLM Software allows for CAD design synchronization, geometry repair and ...

Duration: 12:00

Deep Excavation Simulation Tutorial

This deep excavation tutorial shows the modeling process of a 26-meter excavation using the COMSOL Multiphysics Geomechanics Module. A parametric sweep is used to simulate the excavation steps in ...

Duration: 2:54

Modeling Mechanical Applications in COMSOL Multiphysics

COMSOL Multiphysics® is your ideal software solution for modeling mechanical applications and analyzing the multiple interacting physics affecting them. Structural mechanics, nonlinear material ...

Duration: 2:06

Modeling Chemical Applications

The application of modeling to chemical engineering is a cost-efficient way to explore new designs of systems and processes. COMSOL has been developing its capabilities with the chemical processes ...

Duration: 5:40

Joule Heating in a Fuse on a Circuit Board, Chapter 1

This is the first video in a 3-part demo on multiphysics modeling of resistive heating in an aluminum fuse. Chapter 1 demonstrates how to build the model and add materials.

Watch chapter 2: Adding ...

Duration: 7:00

Joule Heating in a Fuse on a Circuit Board, Chapter 2

Multiphysics modeling of resistive heating in an aluminum fuse on a circuit board. In this second chapter of a 3-part demo you will learn how to add physics and solve the model.

Watch chapter 3: ...

Duration: 8:35

Molecular Flow in an Ion-Implant Vacuum System Chapter 2

This two-chapter tutorial shows how to model an ion implantation system using the Molecular Flow interface available in the Microfluidics Module.

Chapter 2 includes steps: solving and ...

Duration: 16:32

Tonpilz Piezo Transducer Tutorial

Video tutorial showing a study of the frequency response of a tonpilz piezo transducer in COMSOL Multiphysics. The model exhibits full multiphysics coupling between structural and piezoelectric ...

Duration: 13:45

Shell and Tube Heat Exchanger Model Tutorial

This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...

Duration: 6:10

Thermal Stress Analysis of a Turbine Stator Blade

Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...

Duration: 3:25

Cooling of an Injection Mold

INJECTION MOLDING: Cooling of a steering wheel injection mold, including pipe flow and heat transfer in cooling channels. The 1D cooling channels are fully coupled to the heat transfer simulation of ...

Duration: 8:36

Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

Duration: 7:10

Pressurized Orthotropic Container

In this video, a container made of rolled steel is subjected to an internal overpressure. As an effect of the manufacturing method, one of the three material principal directions—the out-of-plane ...

Duration: 7:10

Performing a Multibody Analysis on a Double Pendulum

You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces.

In this step-by-step instructional video, you will ...

Duration: 7:47

Molecular Flow in an Ion-Implant Vacuum System Chapter 1

This two-chapter tutorial shows how to model an ion implantation system using the Molecular Flow interface available in the Microfluidics Module.

Chapter 1 includes steps: adding physics, building ...

Duration: 2:43

Design and Model with LiveLink™ for Solid Edge®

COMSOL's LiveLink™ for Solid Edge® is the ultimate modeling software for Solid Edge® users. The partnership with Siemens PLM Software allows for CAD design synchronization, geometry repair and ...

Duration: 12:00

Deep Excavation Simulation Tutorial

This deep excavation tutorial shows the modeling process of a 26-meter excavation using the COMSOL Multiphysics Geomechanics Module. A parametric sweep is used to simulate the excavation steps in ...

Duration: 2:54

Modeling Mechanical Applications in COMSOL Multiphysics

COMSOL Multiphysics® is your ideal software solution for modeling mechanical applications and analyzing the multiple interacting physics affecting them. Structural mechanics, nonlinear material ...

Duration: 2:06

Modeling Chemical Applications

The application of modeling to chemical engineering is a cost-efficient way to explore new designs of systems and processes. COMSOL has been developing its capabilities with the chemical processes ...