H. Ishimori, K. Endo, H. Sakanakura, M. Yamada, M. Osako
Ritsumeikan University, Kusatsu, Shiga, Japan
National Institute for Environmental Studies, Tsukuba, Ibaraki Prefecture, Japan
This paper presents the numerical simulation model for radiocesium leaching and transporting behavior in municipal solid waste (MSW) landfill and discusses on the design for the required geometry and properties of the impermeable final cover and the soil sorption layer, which work for containment of hazardous waste such as radiocesium-contaminated MSW generated by Fukushima Daiichi nuclear ...
M. Rühl, G. Dietrich, E. Pflug, S. Braun, A. Leson
TU Dresden, Laser and Surface Technology, Dresden, Germany
IWS Dresden, Fraunhofer Institute for Material and Beam Technology, Dresden, Germany
Established joining techniques like welding, soldering or brazing typically are characterized by a large amount of heat load of the components. Especially in the case of heat sensitive structures like MEMS this often results in stress induced deformation and degradation or even damaging of the parts. A back door of this problem are Reactive Multilayer Systems (RMS). These foils consist of ...
D. Papasidero, F. Manenti
Politecnico di Milano, Dipartimento di Chimica, Materiali e Ingegneria Chimica “Giulio Natta”, Milano, Italy
One big challenge for the food industry is to predict and optimize flavors. The Maillard reaction occurs in food matrices containing carbohydrates and proteins under specific operating conditions. The presented research couples thermal and kinetic modeling to the bread baking process, an ideal field to study this complex set of reactions responsible for many bread flavors. The thermal model ...
G. Salazar Duarte, B. Schürer, C. Voss, D. Bathen
Linde AG, Munich, Germany
Universität Duisburg-Essen, Duisburg, Germany
Pressure Swing Adsorption (PSA) and Temperature Swing Adsorption (TSA) are commonly used for separation/purification of gas mixtures in industrial processes. The cycle time of industrial TSA processes usually ranges from several hours to days. The reason for this long cycle time is the usage of purge gas for heating and cooling the system (direct heating), which limits the application of TSA ...
S. Yushanov, J. Crompton, and K. Koppenhoefer
ACES of Columbus, LLC, Columbus, OH, USA
Improved performance of aeroengines requires the development of new manufacturing technologies for ceramic matrix composites (CMCs). This has been simulated using COMSOL Multiphysics. Specialized simulation technologies have been developed to describe the infiltration of molten material into a ceramic perform. The physical phenomena considered in the analysis includes: unsaturated flow, ...
C. Siegel[1,2], G. Bandlamudi[1,2], P. Beckhaus, and A. Heinzel[1,2]
Zentrum für BrennstoffzellenTechnik (ZBT), Duisburg, Germany
University of Duisburg-Essen, Duisburg, Germany
This study highlights the possibility of using COMSOL Multiphysics for solving large scale PEM fuel cell stack models in the order of several million degrees of freedom (DOF). First, different gas flow channel configurations are solved in order to highlight the fluid flow and pressure behaviour. For these models, the full 3D Navier-Stokes equations are solved. It is seen that the amount of fluid ...
Chinese Academy of Sciences, Dalian Institute of Chemical Physics, Beijing, China
We studied the transient characteristics of PEMFC and water transport during PEMFC start-up, concerning the following aspects: Effect of air stoichiometry change on transient behavior of PEMFC, Transient behavior of water transport during PEMFC start-up, and high temperature PEMFC modeling.
D. Yuryev, M. Demkowicz 
Massachusetts Institute of Technology, Cambridge, MA, USA
We describe simulations performed in COMSOL Multiphysics® of the precipitation of helium (He) on solid-state interfaces. The non-uniform precipitation of He at certain interfaces is a result of a heterogeneous energy distribution in the interface plane: He wets high interface energy (“heliophilic”) regions but does not wet low interface energy (“heliophobic”) ones. Using a phase-field model, ...
Extraction of Phenolic Compound from Grape Fruit. A Comparison Between a 3D FEM Model and Experimental Results
E. Madieta, I. Zouid, R. Siret, and F. Jourjon
Laboratoire GRAPPE, ESA, Angers, France
Fresh fruits and vegetables are gaining importance in the human diet because they contain many beneficial compounds. Among these compounds, phenols are of vital importance due to their antioxidant properties. It is well evident from previous researches that the skin of red grapes is considered a good source of phenols. The aim of this work is to simulate the extraction procedure of phenols in ...
G. Selembo, P. Selembo, J. Stanton, and G. Paulsen
University of North Carolina
Surface aeration systems are used in the wastewater treatment industry for the transfer of oxygen in the activated sludge process. These systems are capital intensive and also require a significant amount of energy to operate. Scale-up and design of these systems is largely empirical, and due to the size of these systems, modifications for experimental testing can be economically prohibitive. ...