Here you will find presentations given at COMSOL Conferences around the globe. The presentations explore the innovative research and products designed by your peers using COMSOL Multiphysics. Research topics span a wide array of industries and application areas, including the electrical, mechanical, fluid, and chemical disciplines. Use the Quick Search to find presentations pertaining to your application area.

Numerical Analysis of Radiant Heat Emission Systems

F. Ochs [1], M. Magni [2], M. Bianchi Janetti [1],
[1] University of Innsbruck, Unit for Energy Efficient Buildings, Innsbruck, Austria
[2] University of Bologna, Bologna, Italy

Radiant heating generally addresses all heat emission systems having a share of radiant heat emission greater than 50%, compared to a convector or fan coil where the heat is transferred mainly by means of convection. Recently, so-called infrared-heating systems are discussed as a cost-effective heating system. Relative small areas of typically 0.6 m x 1.2 m with temperatures up to 120 °C are ...

A Numerical Investigation on Active Chilled Beams for Indoor Air Conditioning

G. Cammarata, and G. Petrone
Department of Industrial and Mechanical Engineering, University of Catania, Catania, Italy

In this study fluid-dynamical and thermal performance of active chilled beams is investigated by 2D and 3D modelling in COMSOL Multiphysics. Three different typologies of those air conditioning systems are considered. Results, obtained for typical range of variation of operational conditions, are principally produced as temperature and velocity distributions. Special attention is paid to the ...

Comparison Between Honeycomb and Fin Heat Exchangers

P. Gateau[1], P. Namy[2], and N. Huc[3]
[1]SAS SYNGAS, rue du camp d’aviation, 44320, Saint Viaud, France,
[2]SIMTEC, 8 rue Duploye, 38100, Grenoble,
[3]COMSOL FRANCE, WTC, 38000, Grenoble,

Metal honeycombs are used as catalyst supports. They can be considered as complex fins for heat exchange. A simple heat transfer model was compared with 2D simulations using COMSOL Multiphysics. There was a good correlation when the fluid temperature was the same in all cells. However, significant discrepancy apperared when compared with a 3D simulation with laminar flow. Honeycomb cells ...

Use of COMSOL as a Tool in the Design of an Inclined Multiple Borehole Heat Exchanger

E. Johansson[1], J. Acuña[1], B. Palm[1]
[1]Royal Institute of Technology KTH, Stockholm, Sweden

A field of connected boreholes can be used both for cooling, heating and storage purposes. The boreholes transfer heat to or from the ground, which over time changes the temperature in the ground. It is important that the borehole field is properly sized and evaluated before the construction. This study presents results from borehole field evaluations of inclined boreholes used for cooling ...

3-Dimensional Blood Cooling Model inside a Carotid Bifurcation

R. Sikorski[1], T. Merrill[1]
[1]Rowan University, Glassboro, NJ, USA

Stroke is caused by an interruption of brain blood supply and is one of the leading causes of death and disability. A mild reduction of 2-5°C in tissue temperature through hypothermia has shown reduced tissue infarct size, increased tissue recovery, and positive neurological effects. This paper seeks to predict the outlet blood temperature in the common carotid bifurcation branches. In our ...

Multiphysics Process Simulation of the Electromagnetic-Supported High Power Laser Beam Welding of Austenitic Stainless Steel

M. Bachmann[1], V. Avilov[1], A. Gumenyuk[1], M. Rethmeier[1]
[1]BAM Federal Institute for Materials Research and Testing, Berlin, Germany

The application of an oscillating magnetic field on the high-power full-penetration laser beam welding process of a 20 mm thick stainless steel plate was numerically and experimentally investigated. In the simulations, three-dimensional heat transfer and fluid dynamics as well as electromagnetics were solved taking into account the most important physical effects of the process, namely the ...

Modeling Melting Profiles in Chocolate Pieces for Optimizing their Sensory Properties

B. Watzke[1], F. Lenfant[1], N. Martin[1]
[1]Nestlé research Centre, Vers-chez-les-Blanc, Switzerland

Chocolate is a pleasurable product largely consumed over the world. It is known that ingredients, process and particle size distribution largely impact the chocolate sensory perceptions. It was hypothesized that a suitable choice of chocolate size and geometry modifies in-mouth melting and aroma release and modulates flavour and oral texture perception. Since in-vivo experiments on chocolate ...

Thermal Simulation of FCBGA Package with Heat Sink

M. R. Naik[1]
[1]Nitte Meenakshi Institute of Technology, Bengaluru, Karnataka, India

In a modern IC design, the capability of predicting the temperature profile is critically important as well as cooling and related thermal problems are the principal challenges. To address these challenges, thermal analysis must be embedded within IC synthesis. This paper presents thermal analysis of the FCBGA chip with a 4mm×4mm×0.3mm silicon die. The silicon die dissipates heat flux of ...

3-Dimensional Numerical Modeling of Radio Frequency Selective Heating of Insects In Soybeans

S. Wang [1], Z. Huang [1],
[1] Northwest A&F University, Yangling, Shaanxi, China

Radio frequency (RF) heating have potential as alternatives to chemical fumigation for disinfesting legumes. This study was conducted to investigate the feasibility of RF selective heating of insect larvae in 3 kg soybeans packed in a rectangular plastic container using a 6 kW, 27.12 MHz RF heating system. A finite element based computer simulation program-COMSOL Multiphysics® was used to solve ...

Simulation of a Plastic Bottles Solar Collector

V. Bonetti[1]
[1]Ingegneria Senza Frontiere, DESE, Università di Pisa, Pisa, Italy

In the Andean region of Southern Peru, poverty and climate are extreme: at 4000mt asl, insolation is among the highest in the world but the temperature varies more than 30 degrees between day and night. At the community of Livitaca (Cuzco), the association “Ingegneria Senza Frontiere” is working on a project of bioclimatic architecture. In this context, it is devised a low cost drainback solar ...