Nexter Systems, Versailles, France
Part of a 120mm gun has been represented as a perforated conic iron solid, surrounded by an annular screen. Inside the gun are limit conditions of isolation or thermal flux. The screen is described as a shell, receiving solar heat and exchanging with the outside atmosphere. It bears a defined number of holes on its top and bottom lines, maintaining semi-captive air between itself and the gun. ...
S.V. Aher, P. Devillers, G. Fau, B. Tranain, and C. Buisson
Centre des Matériaux de Grande Diffusion, Ecole des Mines d’Alès, Alès cedex, France
Indian Institute of Technology Kanpur, Kalyanpur, Kanpur, Uttar Pradesh, India
Centre Scientifique et Technique du Bâtiment, France
Surface coating can fullfil their function satisfactorily over an extended period of time only if there is a good bond between the concrete substrate and the coating. The most numerous cases of blistering affect the airtight covers of the concrete subjected to negative pressures of humidity from the support. The general objective of this study is the understanding of the blistering phenomenon. ...
J. Berges, B. Barelaud, I. Niort, and J.L. Decossas
XLIM, Limoges, France
Université de Limoges, France
We propose the study of an electronic sensor allowing the collection of sprays in free space. The detector consists of three elements: a photodiode situated in the center of the structure to which is applied a bias voltage, an aluminum ring which referenced to a voltage higher than that of the photodiode and an insulating material disk (polyvinyl chloride). The total size of the structure is ...
E. Madieta, V. Piron, A. Flament, J.P. L’Huillier, and E. Mehinagic
PRES L’UNAM, ESA, Grappe, Angers, France
ENSAM Paristech, Angers, France
Since the invention of laser sources, understanding the interaction between the laser and biological tissues is a subject of great importance because of their medical applications in particular for diagnostic purposes. They recently found a growing interest in the sector of the arboriculture to check the fruits quality in a non-destructive way. In this work, we study the interaction between the ...
Center for Product Development, Mads Clausen Institute, South Danish University, Denmark
This paper will give a short overview of use of COMSOL Multiphysics for analyzing ancient Greek and Roman catapults with the main focus on the energy storing torsion springs. Catapults have been known and used in the Greek and Roman world from around 399 BC and a fully standardized design for powerful torsion catapults emerged around 270 BC, based on one basic factor, the diameter of the torsion ...