Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Help with moving in Comsol.

Posted Jan 24, 2013, 2:29 a.m. EST Low-Frequency Electromagnetics, Geometry, Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers Version 4.3a 0 Replies

Martin Kandl
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello Mr. Ivar.

I am writing to you because you helped me to solve most of my problems.

Therefore, I would like to learn if you have any experience with choice

Physic Manager Builder.

And one more question:

When I use the AC / DC as MF create a magnetic field geometry where the driver is a magnet or coil.
I think that when an electrical conductor enters the magnetic field would have to move, but for me, nothing moves, even if I use time dependet study.

Thank you very much for your help and willingness.

Dipl.Ing Martin Kandl.
0 Replies Last Post Jan 24, 2013, 2:29 a.m. EST
COMSOL Moderator

Hello Martin Kandl

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content