Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Change coordinate axis label
Posted Dec 4, 2012, 10:33 a.m. EST Geometry, Structural Mechanics Version 4.3 1 Reply
Please login with a confirmed email address before reporting spam
Hi Guys,
Does anyone know how to change the coordinate axes labels in COMSOL 4.3?
As we know, if we have a 3-D model and click 'Default 3-D view', we can observe that X axis is in the upper right direction, Y axis is in upper left direction and Z axis is in up direction.
So whether can I exchange the labels of X and Y axes? I mean I want to make X axis in upper left direction and Y axis in upper right direction. I don't like this. I have drawn a very complex structure, so I don't want to redraw my model.
Thank you for helping!
Does anyone know how to change the coordinate axes labels in COMSOL 4.3?
As we know, if we have a 3-D model and click 'Default 3-D view', we can observe that X axis is in the upper right direction, Y axis is in upper left direction and Z axis is in up direction.
So whether can I exchange the labels of X and Y axes? I mean I want to make X axis in upper left direction and Y axis in upper right direction. I don't like this. I have drawn a very complex structure, so I don't want to redraw my model.
Thank you for helping!
Attachments:
1 Reply Last Post Dec 4, 2012, 2:02 p.m. EST
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
you should not rename the axis variables, but to change your "view orientation", check the view tab ;)
--
Good luck
Ivar
you should not rename the axis variables, but to change your "view orientation", check the view tab ;)
--
Good luck
Ivar