Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Frequency Sweep and Parametric Sweep

Posted Aug 12, 2012, 6:06 p.m. EDT Version 5.2, Version 5.2a 2 Replies

Sankha Mukherjee
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello All,

I am trying to run a parametric sweep under a frequency sweep study. Is it possible to run a parametric sweep along with a frequency sweep. When I try to do this, the program crashes. Can anyone guide me as to how to accomplish this?

Thanks,

Sankha
2 Replies Last Post Dec 28, 2016, 1:48 p.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Aug 13, 2012, 2:12 a.m. EDT
Hi

normally a Parametric Sweep comes before your frequency domain, if not you can run an Study extension auxiliary sweep (in v4.3, not sure for versions before), but then you must sort the results accordingly

--
Good luck
Ivar
Hi normally a Parametric Sweep comes before your frequency domain, if not you can run an Study extension auxiliary sweep (in v4.3, not sure for versions before), but then you must sort the results accordingly -- Good luck Ivar
Sohan Birla
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago Dec 28, 2016, 1:48 p.m. EST
Hello COMSOLIANs,

Can anybody highlights Parametric sweep and Study extension usability and limitations. I have experienced that solution of study extension of any variable is much faster than the parametric sweep of the variable. I also realized that one can not change the mesh/geometry parameters using study extension.

With best,
Sohan
Hello COMSOLIANs, Can anybody highlights Parametric sweep and Study extension usability and limitations. I have experienced that solution of study extension of any variable is much faster than the parametric sweep of the variable. I also realized that one can not change the mesh/geometry parameters using study extension. With best, Sohan

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content