Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

HEAT TRANSFERT IN A BITUMEN TANKER

Posted Aug 8, 2012, 1:43 p.m. EDT Version 4.2a, Version 4.3 0 Replies

Misael Cardona
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, I am a new Comsol modeler and I am trying to model a steel tanker filled with molten bitumen. The tanker is insulated and the bitumen is heated by two propane burners ( in form of U) located at the bottom. For the bitumen I have Non-isothermal Flow-Laminar , for the propane I guess Non-isothermal Flow (flow in a pipe) and also I have Heat transfer in solids for all solid structure and convection to the exterior.

I have tried many times to do my model and always I have some kind of message error.
Someone could give some directions to do this model. I am using Comsol 4.2a.

Thanks
0 Replies Last Post Aug 8, 2012, 1:43 p.m. EDT
COMSOL Moderator

Hello Misael Cardona

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content