Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

MUMPS allocation factor increased

Posted Dec 5, 2021, 6:20 a.m. EST 4 Replies

Carl Xu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Is this harmful and if so how to avoid it?

4 Replies Last Post Dec 26, 2021, 9:34 a.m. EST
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 2 years ago Dec 9, 2021, 8:43 a.m. EST

In itself, it is not harmful, more than that the factorization of the stiffness matrix is somewhat slower because of repeated reallocations of memory.

But in practice, this is almost always caused by an underlying problem in the physics, which makes the prediction of the structure of the system of equations problematic. For example, you often see this when there is severe ill-conditioning, or when there are excessive deformations in a solid mechanics problem (e.g elements turning inside out).

-------------------
Henrik Sönnerlind
COMSOL
In itself, it is not harmful, more than that the factorization of the stiffness matrix is somewhat slower because of repeated reallocations of memory. But in practice, this is almost always caused by an underlying problem in the physics, which makes the prediction of the structure of the system of equations problematic. For example, you often see this when there is severe ill-conditioning, or when there are excessive deformations in a solid mechanics problem (e.g elements turning inside out).
Carl Xu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 years ago Dec 20, 2021, 3:43 a.m. EST
Updated: 2 years ago Dec 20, 2021, 3:48 a.m. EST

Thank you very much Dr Sönnerlind! But why is this warning together with that of inverted elements never seen in lower versions?

Thank you very much Dr Sönnerlind! But why is this warning together with that of inverted elements never seen in lower versions?
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 2 years ago Dec 20, 2021, 4:21 p.m. EST

Can you please elaborate the last question a bit more?

-------------------
Henrik Sönnerlind
COMSOL
Can you please elaborate the last question a bit more?
Carl Xu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 years ago Dec 26, 2021, 9:34 a.m. EST

Can you please elaborate the last question a bit more?

In comsol versions 3.5, 4 etc, there's no such warning as inverted elements.

>Can you please elaborate the last question a bit more? In comsol versions 3.5, 4 etc, there's no such warning as inverted elements.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content