Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

about the export of two parameters scan

Posted May 4, 2012, 9:45 a.m. EDT Version 4.2a 0 Replies

Marvin Farrell
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear all,

For the case of single parameter scan i.e. the wavelength alters and the angle is fixed, it is ok,
likewise, the angle alters and the wavelength is fixed, it is ok.

Now I am trying to get the results involve combining the wavelength scan and angle scan simultaneously.

What I have done is:
step1: frequency domain: here I set the frequency scan
Parametric sweep: here I set the angle scan

Finally I get the results, each angle scan result relates to all the frequency results,

I am wondering how can I export both of the scan results in one picture, just like that attached.

Looking forward to getting your help!

Regards!
0 Replies Last Post May 4, 2012, 9:45 a.m. EDT
COMSOL Moderator

Hello Marvin Farrell

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content