Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
take square root of surface integral
Posted Nov 20, 2011, 10:35 p.m. EST Results & Visualization Version 4.2, Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
I have a derived value that computes a surface integral for each frequency solution, but the final result I want is the square root of all the surface integrals. How do I get a table of square roots of surface integrals?
1 Reply Last Post Nov 21, 2011, 2:48 a.m. EST
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
you can define a variable being the surface integral, or even the sqrt of the surface integral. Then you use the Results - Derived values - Global evaluation of your variable. Then in the Derived values, for a list, you have the choice to sum or take the rms ... (you get only one line then, as the operation is performed on all items, hence you might want to use 2 global evaluations, one for the detailed list, and one for the sum or operation on the table content)
--
Good luck
Ivar
you can define a variable being the surface integral, or even the sqrt of the surface integral. Then you use the Results - Derived values - Global evaluation of your variable. Then in the Derived values, for a list, you have the choice to sum or take the rms ... (you get only one line then, as the operation is performed on all items, hence you might want to use 2 global evaluations, one for the detailed list, and one for the sum or operation on the table content)
--
Good luck
Ivar