Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Tutorials on natural heat convection simulation

Please login with a confirmed email address before reporting spam

Hi, I'm wondering if there is a "simple" simulation tutorial on natural convection? What I want to simulate will be a wall with a window. On one side of the wall it will be indoor climate with room temperature and on the other side I will use a climate data as amibient temperature. So basically I have 3 regions connected to eachother, fluid connected to solid and to fluid again. Is there any tutorials that have similair layout to this case? I have attached my case, it's also in 2D.

Best regards, Arman



1 Reply Last Post Oct 10, 2017, 4:23 a.m. EDT

Please login with a confirmed email address before reporting spam

Posted: 7 years ago Oct 10, 2017, 4:23 a.m. EDT
Updated: 7 years ago Oct 10, 2017, 4:27 a.m. EDT

Hi,

I suppose you already gave those models a look?

link

Maybe this post can guide you further?

https://www.comsol.com/blogs/thermal-modeling-of-the-air-flow-inside-and-around-your-house/

Best, Tobias

Hi, I suppose you already gave those models a look? [link](https://www.comsol.com/models/?q=natural+convection) Maybe this post can guide you further? [https://www.comsol.com/blogs/thermal-modeling-of-the-air-flow-inside-and-around-your-house/](http://www.comsol.com/blogs/thermal-modeling-of-the-air-flow-inside-and-around-your-house/) Best, Tobias

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.