COMSOL provides the Discussion Forum for the benefit of our user community to share ideas with each other, and for open discussion on topics that are of interest to the COMSOL Multiphysics user base.

While COMSOL employees may occasionally participate in Discussion Forum discussions, their contributions to a specific topic or technical question may not be as comprehensive as a response to a support request handled through COMSOL's support process.

All of COMSOL's on-subscription customers are welcome to submit their questions via: www.comsol.com/support to be addressed individually by the COMSOL Technical Support Team.

Active Discussions - 5.2a

Active discussions  |  Recent messages  |  Start a new discussion

Author Subject Views Replies Last Post
Lauren Hyndman Lauren Hyndman Error - cannot evaluate expression
5.2a , Results and visualization , Shear Stress , line plot , error
20 0 4 hours ago
Min Kyunghwan Min Kyunghwan set a maximum value as variables
E-field , Maximum value , 5.2a , Definitions and operators
22 0 7 hours ago
Daniel Barna Daniel Barna How to 'continue' a parametric sweep in case of a problem?
parametric sweep , 5.2a
280 8 23 hours ago
Onyeabo Ekwenmuo Onyeabo Ekwenmuo Error message
5.2a
40 2 1 day ago
Alejandro Piquero Alejandro Piquero Induction and Joule Heating coupling within a Conjugate Heat Transfer problem concerning a power transformer
5.2a , AC/DC Module , Fluid Flow , Heat Transfer
32 0 2 days ago
Florian Tomiak Florian Tomiak modelling cristallization rate (alpha)
5.2a , Materials and functions , Physics , Heat Transfer
45 1 2 days ago
Tarun Singh Tarun Singh how to add rock mass joint set in comsol
Slope Stability , 5.2a , 5.2 , 4.3 , Physics , Structural Mechanics
34 0 3 days ago
Thomas Wolowiec Thomas Wolowiec Setting up an internal port in RF Module
5.2a , RF Module
35 0 4 days ago
Evan Kallenberg Evan Kallenberg Laminar flow model with two inlets, one outlet, and a vacuum pump
5.2a , Fluid Flow , CFD , Microfluidics , Materials and functions , Physics
137 7 4 days ago
Mehdi Jokar Mehdi Jokar Incident Pressure field vs Pressure Boundary Condition
Acoustics Module , 5.2a , 5.2 , 5.1
30 0 4 days ago
Aj Aj Calculation of relative contribution of a layer of material to the overall model
5.2a , Results and visualization , AC/DC Module
26 0 4 days ago
Warapon Wichitpan Warapon Wichitpan Can i import this waveform to my current input ?
5.2a , 4.3b , Heat Transfer
61 1 4 days ago
Ashish Ashish Integral over a arbitrary path
5.2a , AC/DC Module , Definitions and operators , Geometry
770 3 4 days ago
Leyla Roohisefat Leyla Roohisefat how to define material pixel by pixel?
how to define material pixel by pixel? , 5.2a , Materials and functions , AC/DC Module
113 7 5 days ago
Tom Myers Tom Myers Conditional Statements within an Expression
5.2a
18,695 20 5 days ago
Zinar Bilek Zinar Bilek A beginner's question regarding flow simulation of perforated pipes
5.2a , Fluid Flow , CFD
42 0 5 days ago
Mekap Subhasish Pattanaik Mekap Subhasish Pattanaik Optimized meshing
5.1 , 5.2 , 5.2a , Mesh , Physics
56 0 5 days ago
Hamed Rahimi Hamed Rahimi Surface integral in 2D axisymmetric model
5.2a , Acoustics Module , Results and visualization
77 2 5 days ago
Shawn Gao Shawn Gao Cannot Compute Conjugate Heat Transfer
5.2a , Heat Transfer
41 0 6 days ago
Young Song Young Song Thermoacoustics using COMSOL Multiphysics
4.2 , Acoustics Module , Heat Transfer , 4.2a , 5.2a
6,243 3 6 days ago
Vasily Zarubin Vasily Zarubin Time-dependent thermoacoustics
4.4 , Heat Transfer , Acoustics Module , 5.2a
456 1 6 days ago
Bharath Kumar Narukullapati Bharath Kumar Narukullapati To find magnetic field intensity on a surface at particular points in 3D model
5.2a , AC/DC Module
36 0 6 days ago
Andy Trickey-Glassman Andy Trickey-Glassman Transmission Loss Simulation
Acoustics Module , 5.2a , Structural Mechanics
52 1 7 days ago
TingWei Liu TingWei Liu Integration calling 2 different solutions?
5.2a , 5.2 , Results and visualization
74 2 1 week ago
跃德 杨 跃德 杨 Problem with transmission spectrum in optical ring notch filter
5.2a
30 0 1 week ago

Rules and guidelines