Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

RAM Memory usage, Comsol 4.2a, RF module

Please login with a confirmed email address before reporting spam

Dear All,

I have one question, maybe some of you have experience with that.

Where I can find information about relation between number of degrees of freedom (DOF) and RAM memory I need for that number.

So, to simplify, how much RAM memory I need (approximately of course) for simulation where I have 800 000 DOF, 900 000 DOF, 1000 000 DOF, maybe 1300 000 DOF is maximum.

Is 16GB RAM memory enough or not?


I have i7 processor, 4 cores.


Thank for any help


1 Reply Last Post Nov 23, 2012, 5:59 a.m. EST

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Nov 23, 2012, 5:59 a.m. EST

Hi,

I recently had a 1.7 million DOF model that took approx. 50 GB using a direct solver. Iterative solvers take less. 16 GB will problably not take you to 1 M DOF.

Cheers
Edgar
Hi, I recently had a 1.7 million DOF model that took approx. 50 GB using a direct solver. Iterative solvers take less. 16 GB will problably not take you to 1 M DOF. Cheers Edgar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.