Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
output the accurate value of integration
Posted Apr 17, 2012, 11:18 a.m. EDT RF & Microwave Engineering Version 4.2a 2 Replies
Please login with a confirmed email address before reporting spam
I want to output the accurate value of integration for one parameter. For example, we want to know calucalted vaule of the total power flow in some specific area.
In COMSOL 3.5, it is very easy to do it at the column of “post processing”. However, in COMSOL 4.2 a, where to get the similar command or icon?
In COMSOL 4.2a, we can plot a graph of the integration value vs. some parameters. However, in this way we cannot get the accurate value.
In COMSOL 3.5, it is very easy to do it at the column of “post processing”. However, in COMSOL 4.2 a, where to get the similar command or icon?
In COMSOL 4.2a, we can plot a graph of the integration value vs. some parameters. However, in this way we cannot get the accurate value.
2 Replies Last Post Apr 20, 2012, 11:11 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
Check what you can do with the "Results Derived Variables", this enters the results into a table, than can be exported or plotted (and combined with other tables or derived variables
--
Good luck
Ivar
Check what you can do with the "Results Derived Variables", this enters the results into a table, than can be exported or plotted (and combined with other tables or derived variables
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Thanks, Kjelberg. 4.2a changes the interface.
Hongtao
Hongtao