Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

film bulk acoustic resonator simulation model

Please login with a confirmed email address before reporting spam

Hi, there.

Recently, I'm engaged in the FBAR simulation from the model. and what really bothers me is that if I enlarge the frequency simulation range, like, for instance, 200MHz to 250MHz, there would be a negative value for admittance Y and Quality factor, and I wonder why this kind of thing happens.

Since this negative admittance is not proved theoretically, i doubt if denser meshing should be employed to solve this problem.


Thanks a lot!!

0 Replies Last Post Mar 18, 2012, 2:28 a.m. EDT
COMSOL Moderator

Hello Jianan Wang

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.