Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

The integral order

Please login with a confirmed email address before reporting spam

Hi, I download the file:
www.comsol.com/showroom/downloadfile/model/12211/version/comsol42a/file/Image_Import.pptx
and the model
porous_thermal.mph
here was defined an integral, to integrate the total heat flux on the left boundary (2D model), (intop1) (slide 12).
The integral order was 4.
Is that Ok?.
The integral is on a plane. I think that the integration order is 2.
Jose

1 Reply Last Post Mar 12, 2012, 4:27 p.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 12, 2012, 4:27 p.m. EDT
Hi

COMSOL uses mostly 4th order integration, by default, but you might change that if you have other preferrences, or good reasons

--
Good luck
Ivar
Hi COMSOL uses mostly 4th order integration, by default, but you might change that if you have other preferrences, or good reasons -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.