Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Plot max temperature value at each subdomain

Posted May 9, 2011, 6:23 a.m. EDT Heat Transfer & Phase Change, Structural Mechanics Version 3.5a 0 Replies

Yajuan Liu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello! Everyone!

My model have 6 subdomains and I want to get the Tmax value and its coordinate of each subdomain.

But when I use [Tmax P]=postmax(fem,'T','subdomain',[1]) and [Tmax P]=postmax(fem,'T','subdomain',[2]) ...,the results are the same every time.

I think the max temperature and its coordinate of each subdomain are different not the same, I don't know the reason.

Can you give me some hints?

Thanks in advance!

Best wish!

Yajuan
0 Replies Last Post May 9, 2011, 6:23 a.m. EDT
COMSOL Moderator

Hello Yajuan Liu

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content