Mechanical

Supratik Datta | April 4, 2014

Previously, you saw how to compute stiffness of linear elastic structures in 0D and 1D. Today, we will expand on that and show you how to model this in 2D and 3D. We will also show you an alternate method to compute stiffness.

Read more ⇢

Article Categories

Supratik Datta | April 3, 2014

Today, we will introduce the concept of structural stiffness and find out how we can compute the stiffness of a linear elastic structure subjected only to mechanical loading. In particular, we will explore how it can be computed and interpreted in different modeling space dimensions (0D and 1D) and what factors affect the stiffness of a structure.

Read more ⇢

Article Categories

Alexandra Foley | March 17, 2014

When modeling computationally taxing geometries, you can save time by using cyclic symmetry to cut down on memory usage. This can be more complex for rotationally than axially symmetric geometries. However, with the Structural Mechanics Module you can easily solve a single section of an impeller model and still get accurate results.

Read more ⇢

Article Categories

Nancy Bannach | March 11, 2014

A lot of materials have anisotropic properties and, in many cases, the anisotropy follows the shape of the material. COMSOL Multiphysics offers different methods for defining curvilinear coordinate systems. Here, we discuss the concepts of each and when to use which method.

Read more ⇢

Article Categories

Henrik Sönnerlind | March 7, 2014

Buckling instability is a treacherous phenomenon in structural engineering, where a small increase in the load can lead to a sudden catastrophic failure. In this blog post, we will investigate some classes of buckling problems and how they can be analyzed.

Read more ⇢

Article Categories

Gerard Hegemans | March 4, 2014

Cars come with either an automatic gearbox or a manually operated one, a stick shift. With a manual gearbox, we use the stick shifter very frequently while driving the car, yet we hardly ever think about the way the mechanism works. Here, we investigate how it works and what forces are acting on it when submitted to a very common load case — selecting first gear — with the help of a COMSOL Multibody Dynamics model of the gearshift mechanism.

Read more ⇢
Mads Herring Jensen | February 28, 2014

Previously, we introduced the theory behind thermoacoustics. Here, I will go deeper into modeling acoustics with the Thermoacoustic interface in COMSOL Multiphysics and show you some tips and tricks on how to do this.

Read more ⇢
Mads Herring Jensen | February 27, 2014

When sound propagates in structures and geometries with small dimensions, the sound waves become attenuated because of thermal and viscous losses. More specifically, the losses occur in the acoustic thermal and viscous boundary layers near the walls. This is a known phenomenon that needs to be included when studying and simulating systems affected by these losses in order to model these systems correctly and to match measurements.

Read more ⇢

Article Categories

Ahsan Munir | February 26, 2014

DNA is a complex molecule that contains instructions for life and often referred to as a “digital fingerprint” or code telling a cell what to do. DNA is often the only means for accurate testing and identification of biomolecules, cells, or even an entire person during forensic investigations. The need to be able to test for DNA, as quickly as possible, and even at the site where the sample is taken, is becoming more and more important.

Read more ⇢
Walter Frei | February 11, 2014

When solving a thermal processing problem, such as the heating or cooling of a part, it is desirable to change the heating, or cooling, based upon the computed solution. That is, we may want to include a feedback loop into our model. In this article, we will set up a feedback loop using a component coupling to turn a heat load on or off depending upon the temperature of the part being heated.

Read more ⇢

Article Categories

Lexi Carver | February 4, 2014

Keeping the inside of a building at a comfortable temperature requires well-designed windows to keep heat out during the summer and heat in during the winter. Let’s take a look at how windows provide thermal insulation and how they carry heat (or not) between the inside of a building and the outdoors.

Read more ⇢

Article Categories

1 2 3 4 5 12